Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Quick Start Guide
5 Playing a DVD with Surround Sound
1 Turn on your TV, and your DVD player. 2 Press the DVD button on the remote control.
You should see "DVD/LD" in the display on the receiver.
3 Press the STANDARD button for the basic surround sound setting. 4 Play a DVD.
6 For Better Surround Sound
1 Go through the entire "Initial Set Up" procedures as outlined on pages 27-38 of this instruction manual.
If you don't hook up any other components with digital audio or do so following the default settings of the receiver (see page 15) you won't have to assign any more digital inputs, but many other adjustments will improve the sound tremendously.
2 Experiment with the different sound settings offered with the 2/DTS and DSP buttons.
For more information see pages 39-42.
3 As mentioned above you should go through the "Speaker Setting" instructions on pages 31-32 to set up your speakers properly. If you don't do this you, at least, need to make sure the CENTER channel is turned off if you don't have a center speaker. Use the instructions on pages 31-32.
