Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 91 (kliknij aby zobaczyć)
5
6
7
8
5 Receiver and component control buttons (Press the corresponding MULTI CONTROL button first to access). These controls function according to the component you�ve selected. TOP MENU Displays the disc �top� menu of a DVD. AUDIO Changes the audio language or channel with DVD discs. MCACC SETUP Use to setup your speaker system using the multichannel acoustic calibration system. MENU Displays the disc menu of DVD-Video discs. It also displays TV and DTV menus. INPUT ATT Attenuates (lowers) the level of an analog input signal to prevent distortion. T.EDIT Use to memorize and name a station for recall using the STATION +/� buttons. GUIDE Displays the guides on a digital TV. SUBTITLE Displays/changes the subtitles included in multilingual DVD-Video discs. SLEEP Use to put the receiver in sleep mode and select the amount of time before the receiver turns off. 6 � � � � (TUNE +/�,ST +/�) /ENTER Use the arrow buttons when setting up your surround sound system. Also used to control DVD menus/options and for deck 1 of a double cassette deck player. Use the TUNE +/� buttons to find radio frequencies and use ST +/� to find preset stations. 7 Component/Tuner control buttons The main buttons (3, 7, etc.) are used to control a component after you have selected it using the MULTI CONTROL buttons. The tuner/DTV controls above these buttons can be accessed after you have selected the corresponding MULTI CONTROL button (TUNER or TV/SAT (when connected to DTV)). RETURN Returns to the last screen selected when using a digital TV tuner. BAND Switches between the tuner AM and FM bands. RF ATT Use to lower the input level of a radio signal that is too powerful or contains interference that causes the sound to distort. DISPLAY Use to switch the display between the station preset name, frequency and RDS data when using the tuner. CLASS Switches between the three banks (classes) of radio station presets.
MPX Switches between stereo and mono reception of FM broadcasts. If the signal is weak then switching to mono will improve the sound quality. D.ACCESS After pressing, you can access a radio station directly using the number buttons. 8 Number buttons Use the number buttons to directly select a radio frequency or the tracks on a CD, DVD, etc. 9 CHANNEL +/� Use to select channels when using a VCR, DVR, etc. 10 INPUT SELECT Use to select the input source. 11 LED This lights when a command is sent from the remote control. 12 SOURCE Press to turn on/off other components connected to the receiver. 13 DISC (ENTER) The button�s use depends on the component selected. It can be used to enter commands for TV or DTV, and can also be used to select a disc in a multi-CD player. 14 TV CONTROL buttons These buttons are dedicated to control the TV assigned to the TV CONT button. Thus if you only have one TV to hook up to this system assign it to the TV CONT MULTI CONTROL button. If you have two TVs, assign the main TV to the TV CONT button. Use to turn on/off the power of the TV. (TV CONTROL) INPUT SELECT Use select the TV function. CHANNEL +/� Use to select channels. VOLUME +/� Use to adjust the volume on your TV.
