Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 82 (kliknij aby zobaczyć)
1
2
3
4
Display 1
A
2
3
4
5
6
7
8
9
10 11
1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: B AUTO Lights when AUTO signal select is on SB Depending on the source, this lights when a signal with surround back channel encoding is detected. DIGITAL Lights when a digital audio signal is detected. DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected. DTS Lights when a source with DTS encoded audio signals is detected. C
12
13
7 MIDNIGHT Lights during Midnight listening. 8 MONITOR Lights when MONITOR is selected
14
15
9 Speaker indicator Shows the speaker system currently in use. 10 Character display
11 Neo:6 Lights during NEO:6 processing 12 ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 13 LOUDNESS Lights when LOUDNESS has been selected. 14 TUNER indicators
2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 4 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Pro Logic II decoding. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 6 DIRECT Lights when source direct playback is in use. This function bypasses all tone, balance, Advanced surround, and Dolby Surround effects.
STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. MONO: Lights when the mono mode is set using the MPX button. TUNED: Lights when a broadcast is being received. 15 Master volume level Shows the overall volume level. ---dB indicates the minimum level, and �0 dB indicates the maximum level. Depending on your level settings for each channel, the maximum level can range between �10 dB and �0 dB.
