Tekstowy podgląd strony 106 (kliknij aby zobaczyć)
TROUBLESHOOTING
When The Misfeedlndicator(~
+ )Blinks
�~~+ E� Paper wrapping around the drum
1. Push the master eject unit open and open the master eject unit. button
2.
Remove the misfed paper.
3.
If the paper is completely wrapped around the drum, peel off the edge of the paper. Then, close the master eject unit and press the drum until the lamp turns green again. And then, open the master eject unit and remove the misfed paper.
4.
If you cannot remove the misfed paper, pull out the drum unit after confirming the lamp is green, and remove the misfed paper from the drum.
