TOSHIBA W422
Instrukcja Serwisowa

Disassembly and Reassembly

1-2-27 Post #8 Guide Ass�y Removal
1) Rotate the Post #8 Guide Ass�y � in the direction of arrow to lift up.

1-2-29 How to Eject the Cassette Tape (If the unit does not operate on condition that is inserted into housing ass�y)
1) Turn the Gear worm � clockwise with screw driver.(Refer to arrow) (Other method : Remove the Screw of Motor Load Ass'y, Separate the Motor Load Ass'y)

� POST #8 GUIDE ASS'Y

� GEAR WORM

Fig. 4-37 Post #8 Guide Ass�y Removal Fig. 4-39

1-2-28 Level Head Cleaner Ass�y Removal (Optional)
1) Release the Hook �. 2) Lift the Lever Head Cleaner Ass�y ´.

2) When Slider S,T are approched in the position of unloading, rotate holder Clutch counterclockwise after inserting screw driver in the hole of frame's bottom in order to wind the unwinded tape. (Refer to Fig.4-40) (If you rotate Gear Worm � continuously when tape is in state of unwinding, you may cause a tape contamination by grease and tape damage. Be sure to wind the unwinded tape in the state of set horizently.) 3) Rotate Gear Worm � clockwise using screw driver again up to the state of eject mode and then pick out the tape.(Refer to Fig.4-39)

´ LEVER HEAD CLEANER ASS'Y

� HOOK

SLEEVE-HEAD CLEANER

FRAME

Fig. 4-38 Post #8 Guide Ass�y Removal Fig. 4-40 Toshiba 4-19