TOSHIBA W715C
Instrukcja Serwisowa

2-14
ADDITIONAL INFORMATION

Table of Brand Codes

Before Calling Service Personnel
Check the following symptoms before requesting servicing. name of your TV Brand Code

Reference Information

Toshiba 01 Proton 11

Bell & Howell 09 Pulser 14

Carver 10 Quasar 07, 15 No power. The desired sound is not heard, such as

Celebrity 03 Radio Shack 13 Citizen 12 RCA 02 � Setting of sounds is not correct. � Plug power cord into the outlet firmly. � Select a desired sound using A.SELECT.

SAP, stereo, or regular sound. � The power cord is not plugged in.

Curtis Mathes 12 Realistic 09, 11, 13 Although power is on, the VCR will (page 32)

Dumont Runco (NEC) 14

not work. Noise is present in the Hi-Fi sound being � There is no cassette.
� Load a cassette. (page 18)

Electro band 03 Samsung 11, 12 played.

Emerson 09, 11 Sanyo 09 � Tracking is not set appropriately.

Fisher 09 Scotch 11 � There has been a power failure. � Reset the clock. (page 15)

The clock does not work. � Adjust the tracking manually. (page 19)

GE 02, 07, Scott 11 The timer recording function does not

Gibralter 14 Sears 01, 02, 09, 10, 11 work.

The timer does not work properly. Goldstar 11 Sharp 08, 13 � There is an error in programming.
� The time is incorrect. � Reset the timer recording program. (page 27) � Set the clock correctly. (page 15) � There is no cassette in the VCR. Infinity 10 Supreme 03 (page 18) screen. channel or video input mode is � The cassette does not have the safety tab. cover hole with adhesive tape. (page 18) JVC 05 Technics 07, 15 � Set TV to the video channel (3 or 4) or set video input mode on the TV. LXI 01, 02, 09, 10, 11 Techwood 07 � The timer indicator is not displayed. (page 11) � The TV signal is weak. � Adjust the antenna direction or use an � There has been a power failure. Marantz 10 TMK 11 � Reset the clock. (page 15) Megatron 06, 11 Victor 05 optional antenna booster. Hallmark 11 Sony 03 Hitachi 06 Soundesign 11 � Load a cassette with the safety tab attached. The picture does not appear on the TV

JBL Sylvania 10

ADDITIONAL INFORMATION

JCB 03 Tandy 08 set correctly. � Use another cassette with a safety tab or

Magnavox 10 Teknika 04, 10, 12 � Press both TIMER simultaneously. (page 26)

Memorex 04, 09, 11 Vidikron 10 The VCR Plus+ system recording cannot � The power cord is not plugged in. � Plug power cord into the outlet firmly. be done. MGA 04, Vidtech 11 correctly. � The video channel or VCR mode is not set Motorola 08 (page 29) correctly. � Press TV/VCR to select the VCR mode and

The picture does not appear on the TV screen during recording and playback. Mitsubishi 04, 11 Zenith 14 � Make the guide channel number setting.

� The guide channel numbers are not set up Midland 02, 07, 14 Wards 10, 11, 13

MTC 12 � The timer indicator is not displayed.

NAD 01, 11 � Press both TIMER simultaneously. (page 26) set the TV channel to 3 or 4. (pages 11, 24)

Nikko 11

The VCR does not record.
� The loaded cassette has no safety tab. hole with adhesive tape. (page 18) Panasonic 07, 10, 15

Optimus 09

Optonica 08 � Use cassette with a safety tab or cover the

Penney 01, 02, 07, 11, 12 The playback picture is poor. � Adjust the tracking manually. (page 19) Philips 10 � Clean the video heads with a commercially Princeclub 12

Philco 10 � Tracking is not set appropriately.

Pioneer 16 � The video heads are dirty. available cleaning tape.

Prism 07

Proscan 02

34 35

Toshiba