BEFORE USING THE APPLIANCE FOR THE FIRST TIME: � FOLLOW THE �INSTALLATION INSTRUCTIONS�. � REMOVE THE TRANSIT BOLTS BEFORE USING THE APPLIANCE. � First wash cycle without laundry: Turn on the tap. Close the appliance door. Pour a small amount of detergent (about 30 ml) into the detergent dispenser . Select a short program (see programme chart). The �Power On� indication shows that the machine is switched on. The pilot lamp of the �Start/Pause� button flashes. Press the �Start/Pause� button. This initial cycle serves to eliminate any water remaining after your appliance was tested at the factory. NORMAL DAILY USE: 1. 2. 3. 4. 5. 6. Turn on the tap. Sort the wash according to fabric type and colour and load the appliance. Close the door. Put in detergent and any additives required into the dispenser. Select the programme, the temperature and any special options required. The pilot lamp of the �Start/Pause� button flashes. Press the �Start/Pause� button. 1. 2. 3. 4. 5. 6.
IMPORTANT: During the first 15 minutes of the �Cotton�, �Coloured cotton� and �Synthetics� programmes the door can be opened for adding laundry (�Door Free� indicator). This is not possible if �Rapid� is selected. 23
