A Connect
Connect AC power
Connect the DC cable with the docking cradle and Pipe speaker first, then connect it with the AC adapter, and then connect the adapter with the AC power cord.Then plug the AC plug into a standard AC outlet.
B1 Install
1
Change the docking cradle to match with your portable player
The docking cradle can support both iPod and GoGear. Follow steps below to change it into desired mode - Default position is prepared for iPod - Go to B2 Install for iPod user.
B2 Install
2
Install dock adaptor
Insert a dock adapter that matches with your portable player (take iPod adapter as example).
C
Enjoy
You can use the controls on your iPod/GoGear to playing music. However, with the supplied remote control,you can enjoy music in a more easy and comfortable way. Power on/off
2 1
Press Power to turn the iPod on or off Note: This function isn't applicable for GoGear
MENU
OK
Docking cradle Pipe speakers
1 3
AC outlet
Play
Press 2; to start playing � While playing, press 2; to stop playing temporarily. Press 2; again to resume playing.
OK
5 4
AC power cord AC adapter DC cable
3
2 6
Pipe speakers power on/off
Install portable player
Adjust volume
Press Volume -/+ to increase or reduce volume
VOLUME
VOLUME
Plug your portable player into the cradle (take iPod as example). -Turn on the power of pipe speakers.
CAUTION:
This product is powered by a specified power supply unit SA1460-240200 (I/P: AC 100-240 V~, 50/60 Hz, 1.5 A; O/P: DC 24V , 2.0 A).
Skip to the previous or next track
� Press � Press to skip to the previous track to skip to the next track
VOLUME
Connect audio cable
Plug one end of the audio cable to the black 3.5mm Audio Out jack, and the other end to the audio in jack on the pipe speaker.
Searching for desired track
1. Press MENU button � The MENU screen is shown on the iPod 2. Press 3 or 4 to select desired folder, then press Select (OK) button to confirm the selection Note: This function isn't applicable for GoGear
MENU OK
MENU
Un-install
1. Slide the front cover horizontally in the direction shown above to open the front cover
(Audio Out)
OK
To connect with a different iPod portable players, dismount the iPod first, then pop up the corresponding dock adapter and replace with a new one of the matching type.
2. Rotate the front cover in 180 degree 3. Slide the front cover back onto the docking cradle
Charging iPod using the docking station
When the iPod is properly connected on the docking cradle and the power supply to the docking cradle is connected, battery charging start automatically. Helpful hint: � You can also use a USB cable (not supplied) to connect the docking cradle with your PC to charge your iPod or GoGear
