HUGHES&KETTNER WARPFACTOR
Instrukcja Obsługi

WARP FACTOR - MANUAL

KNOBS / SWITCHES
GAIN: Controls input sensitivity and determines the degree or amount of distortion.

ENGLISH

WARP: Shapes midrange frequencies. Set to the far left position, it boosts low mids from 250 Hz to high mids at 1 kHz. Set to the far right, it cuts mids at 500 hertz with a slight presence boost at 3 kHz. LEVEL: Controls output level without influencing tone. SUB: Boosts the low end at 90 hertz. (The red ring is no longer visible when activated.) This is the resonance frequency of a truly evil-sounding 4 x 12" cab. Step on this when you want to put the pedal to the metal. ! CAUTION ! Not suitable for
all combos and speakers!

PURE DARK ENERGY
YOU WANT IT, YOU GOT IT.
The WARP FACTOR� was designed specifically to help you blast through creative barriers and supercharge your powers of musical expression. A specially designed circuit puts at your disposal a sonic force of awesome dimensions. The perfect powerhouse for pumping out massive riffs, this amp�s to-die-for metal tone sounds as if forged with hammer and anvil. Be prepared for overtones, sustain and bottom end without end! Courtesy of its highcurrent circuitry, the WARP FACTOR� delivers the in-your-face brand of sound pressure, transporting the sound of drop D-tuned and seven-string guitars to your audience and, given the right rig, into the next county. Of course you need a wall wart to do this. Only then will this little monster get the juice it needs to shatter the dynamic barriers of battery-operated devices. Words fail: Simply twist your guitar�s volume knob and vary the intensity of your attack and you�ll discover exactly what we mean.

POWER UNIT: Be sure to use an original Hughes & Kettner® power unit only. Damage caused by the use of another power unit invalidates the manufacturer�s warranty!

NOTES ON SAFETY
Make sure that the mains voltage indicated on the power unit corresponds to the local mains voltage. Always connect the power unit�s output with the device first before plugging the power unit into a socket. Do this to prevent short circuits that can harm you or your device.

LIMITED WARRANTY
The manufacturer warrants that this product is free from defects in material and workmanship at the time of manufacture. This warranty is valid only for two years from the date of original purchase. This warranty shall not apply and the manufacturer disclaims any liability or responsibility whatsoever for any damage or defect resulting from alteration, misuse, abuse, neglect, or faulty operation or for any product the serial number of which has been damaged, altered or removed.

SETTING UP
Connect the WARP FACTOR� between your guitar and amp. This is strictly a front-end stomp box. It wasn�t designed to plug it into an FX loop and has no business being there! Your best bet is to dial in the cleanest sound you can get and turn your amp up loud. After you have activated the WARP FACTOR�, use the SUB switch to adjust its bottom-end response to suit your setup.

5

ENGLISH