Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Installation
3
Extend the extension line and move it in different positions for optimal reception (as far away as possible from the TV, VCR or other radiation sources). Fix the extension line�s end to the ceiling.
Using AC power 1 2
Make sure all the connections have been made before switching on the power supply. Connect the AC power cord to the wall socket. This switches on the power supply. When Station is switched to standby, it is still consuming some power. To disconnect the system from the power supply completely, remove the power plug from the wall socket. The type plate is located on the rear of the set. For users in the U.K.: please follow the instructions on page 2.
4
B Connecting an additional appliance
It is possible to use an additional appliance, e.g. TV, VCR, Laser Disc player, DVD player or CD recorder, with the Station.
1 2
Insert the red plug of the red/white audio cables (not supplied) to the red socket AUX IN R and the white plug to the white socket AUX IN L. Connect the other end of the audio cables to the AUDIO OUT terminals of the additional appliance.
R AUX IN
L
Helpful hints: � If the connected device has only a single audio out terminal, connect it to the AUX IN left terminal. Alternatively, you can use a �single to double� cinch cable, but the output sound still remain mono. � Always refer to the owner�s manual of other equipment for complete connection.