...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 23 (kliknij aby zobaczyć)
TO CANCEL AN AUTOMATIC TIMER RECORDING
2
Set �AUTO RETURN� to [ON]
� USER�S SET UP � RENTAL REPEAT PLAY B AUTO RETURN [OFF] [OFF] [ON]
� After setting a program;
1)Press the POWER button. 2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR.
Press the PLAY/K or STOP/L button to point to �AUTO RETURN�. Press the F.FWD/B or REW/s button until [ON] appears.
3
Auto Return will begin
�
TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the RECORD indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm �TIMER PROGRAMMING� is pointed. 4)Press the F.FWD/B button. The details of programs appear on the TV screen. 5)Press the MENU button on the remote control to return to TV mode.
When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s). NOTE: � If you press the POWER button while tape is rewinding, the Auto Return will stop.
4
Watch the recorded program
Press the PLAY button.
TO CANCEL THE AUTO RETURN MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. If there is a power failure of any kind, the unit will retain its memory for this feature.
HINTS FOR AUTOMATIC TIMER RECORDING � Make sure the channel you want to record is prop� � � � �
erly set in advance. It is not necessary to press the RECORD button for timer recording. Recording begins automatically at the Start time. If you are recording using a Timer mode, you may not operate the unit manually. place (or you must put tape over the hole). If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off. If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, and the tape will be ejected.
WAKE UP TIMER
The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time. NOTES: the timer.
� The erase-prevention tab on the cassette must be in
� Use the remote control for this procedure. � Clock must be set to the correct time before setting � If you want to select [TAPE], you must insert a
playback automatically on your desired time. cassette tape in the TV/VCR. The tape will start
1
Select �WAKE UP TIMER�
AUTO RETURN
With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.
Press the WAKE UP/SLEEP button on the remote control once, and confirm �ON/OFF� is pointed. Press the F.FWD/B or REW/s button until [ON] appears.
WAKE UP B ON/OFF TIMER TV/TAPE TIME
[ON] [TV] [12:00AM]
2
Select �TV� or �TAPE�
1
Select �USER�S SET UP�
�MENU� TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER�S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH
Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to �USER�S SET UP�. Then, press the F.FWD/B button.
Press the PLAY/K or STOP/L button until to point to �TV/TAPE�. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE].
