Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 28 (kliknij aby zobaczyć)
Dimensions
Installation area WARNING
Never ground the washer to plastic plumbing lines, gas lines or hot water pipes. Appliance stability is important so that the washing machine does not walk" during the spin cycles. The installation area must be solid and even. Soft floor surfaces, such as carpets or surfaces with foam backing, are not suitable. If the washing machine is to be installed on a wood joist floor: q If possible, place the washing machine in a corner of the room. q Screw a water resistant wooden board (at least 30 mm thick) to the floor. q Affix the feet of the washing machine using holding brackets *. If the washing machine is to be placed on a pedestal:
a = 600 mm // 23 5/8" c = 852 mm // 33 1/2"
b = 590 mm // 22 1/2" Approx. weight = 69 kg // 152 lbs.
q Affix the feet of the washing machine using holding brackets *. * Holding brackets (set) can be obtained from the Customer Service (order no. WMZ 2200).
WARNING
To reduce the risk of fire this washer mjust be fastened or otherwise secured to an uncovered concrete floor. Pedestal Mounting For mounting the washer on the Bosch 12" pedestal (accessory No. WTZ 1210) follow the instructions supplied with the pedestal.
