ZANUSSI WI1018N
Instrukcja Obsługi

Operating sequence
Washing only
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.

4. Depress button required

or

if

5. Select the temperature
Turn the dial to the required setting.

95

1. Place the laundry in the drum
Open the door by pulling the catch outward. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0455S

6. Select the required programme
Turn the programme selector dial clockwise to the desired position (A if you wish to perform a prewash).

P0004

B

2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .
P0129

7. Start the machine
Depress the ON/OFF button : the mains-on light will illuminate and the machine starts operating.

3. Measure out the additive
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

P0414S

P0006

P0005

15

ENGLISH