Operating Instructions
Video Outpu t Board 1 Only T X-1
DATA 3 4 /TMNL7 DATA HDR3 3 /TMNL8 R1/TMNL HDR4 4 HD tput Board 2 HDR2/TMNL Video Output Board 1 Video Ou
2 DATA 6 TMNL NL2 TM
DATA 1 5 TMNLDATA S TMNL1/P
MODE MODE
T ITOR OU MON
OU
WJ-PB65M16
Model No.
ALARM
T1 OU
ALARM
OUT 2
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
PRECAUTIONS
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. � Do not attempt to disassemble the apparatus. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance. � Do not strike or give a strong shock to the unit. It may cause damage or allow water to enter the unit. � Pay attention to static electricity Make certain to keep boards inside the anti-static sack until it is installed. Put your hand on a metallic surface, other than the boards to discharge static electricity before installation. Do not touch components mounted on the boards directly by hand. Hold only both edges of the boards when installing.
REFERENCES
Along with this document, refer to Matrix Switcher WJSX650 Series Operating Instructions for major operating controls and their functions, switch settings, and board mounting procedure.
PREFACE
Video Output Board WJ-PB65M16 is designed for monitor output channel expansion of Matrix Switcher WJ-SX650 Series. Important: � The software versions of Video Output Board 1 and 2 must be the same. If the software version of each board is different, upgrade the lower version to the higher one. (Refer to WJ-SX650 Series Operating Instructions for how to check the software version.) � Refer to the dealer for the version-up procedure. (Surely follow the instructions and notes.)
FEATURES
� With a set of this board, up to 16 monitors can be added. � Up to 32 alarm output signals can be supplied to external devices connected to the ALARM OUT 1 and 2 ports.
