Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 57 (kliknij aby zobaczyć)
Installation
HDD safety mode
When installing the recorder in the rack without turning the power of the recorder off, activate the HDD safety mode. When the HDD safety mode is activated, the power of the all HDDs will be off. (Recording and playback will be forcibly canceled.) At the default, the recorder will start up in the HDD safety mode to protect the HDDs from shock, vibration, etc. during installation.
Operating the recorder for the first time
When turning on the power of the recorder, the following message will be displayed. "ALL HDD MOTORS STOPPED. PRESS [SET] BUTTON TO RESTART." Press the [SET] button to start up the recorder.
Installation
When installing/uninstalling the recorder (into/from the rack) after starting operation of the recorder in the system, do the following.
z x c
Restart the recorder using the setup menu ("Maintenance" � "Reboot System"). (
