JVC WR-DVX
Instrukcja Obsługi

For GR-DVX Digital Video Camera
WR-DVXU

Mounting method and operating method for each part
1. Remove the four buckles on the marine case and open
the front lid.

Marine Case
ENGLISH

User�s Manual

2. Remove the camcorder hand strap or grip strap. 3. Open the LCD monitor, then insert the camcorder into 4. Position so that the power
the marine case. dial projection in the marine case pushes the lock button located on the camcorder power dial.

Names of the parts

1

2 3 4 5 6

5. Turn the marine case
power dial to the left to move the camcorder power dial to the � A � position.

6. Place the included antifogging silica gel in the gap between the camcorder and the marine case to prevent fogging in the marine case.

2

2 1 3

7. Before sealing the marine

1 2 3 4 5 6

.......... Marine case front lid .......... Buckle .......... Power dial .......... START/STOP button .......... Zoom lever .......... SNAPSHOT button

8. Check that the O-ring on the front lid is correctly

case, check that there is no sand, dirt, or other foreign matter on the O-ring mounted on the front lid or on the O-ring contact surface on the main unit. Also make sure that the inserted silica gel bag is not pinched. If you dive with foreign matter trapped in these areas, water will leak. mounted in the groove, then press in the front lid. Flip down the four buckles in the directions indicated by the arrows in the figure on the right to seal the marine case. button once to start recording from the camcorder (1 in the figure on the right). Press the button again to stop recording (1 in the figure on the right).

Please read before use.
This marine case is a precision instrument designed to permit safe video recording under high water pressure. Please pay careful attention when handling the unit before and after use, as explained in this user�s manual. Each part of the marine case has been subject to strict controls during the manufacturing process, and the individual functions have faced stringent tests during the assembly process. Each marine case has also had to pass water-proof inspections using highpressure water testers. However, damage can sometimes occur during transport and distribution, or during storage after purchase, so before diving always carry out the following pre-use test to verify safety.

9. Press the START/STOP

10. The zoom can be adjusted with the zoom lever (2 in
the figure on the right).

11. It is possible to take a snapshot using the SNAPSHOT button (3 in the figure on the right). 12. When you are finished
shooting, turn the power dial to the right to switch the camcorder power dial to the Off position (4 in the figure on the right).

4

Pre-use test
When using the marine case for the first time after purchase, or after it has been in storage for a long time, dive to the usage depth with only the empty marine case (without mounting the camcorder inside), and test for water leaks.

LYT0002-0Q9A