Mounting the Lens
Caution: Before you mount the lens, loosen the fixing screw on the side of the camera, and rotate the flangeback adjusting ring counterclockwise until it stops. If the ring is not at the end, the inner glass or CCD image sensor may be damaged. 1. Mount the lens by turning it clockwise on the lens mount of the camera. 2. Connect the lens cable to the auto iris lens connector on the side of the camera.
Caution for Mounting the Lens
The lens mount should be a CS-mount (1�-32UN). In case of a C-mount, it should be a C-mount adapter and the lens weight should be less than 450 g (0.99 lbs). If the lens is heavier, both the lens and camera should be secured by using the supporter. The protrusion at the rear of the lens should be as shown below:
