Set the privacy zone
When there is a zone that is not to be displayed, set the zone as a privacy zone to not to display. Up to 8 privacy zones can be set.
Step 1 Move the cursor onto "PRIVACY ZONE" on the "CAMERA SETUP" page and press the [SET] button after selecting "ON (1)" or "ON (2)". � The zone number selection page will be displayed.
**ZONE NUMBER 1/8**
Notes: � When selected the zone number already in use in step 3, images inside of the respective zone that is set on the zone setting window will be displayed. By performing steps 4 and 5, the set zone will be canceled and a new zone will be set. � To cancel the zone settings, press the [SET] button after moving the cursor onto "DEL". The zone settings will be canceled. Step 4 Move the cursor onto "POSITION" and press the [SET] button. Step 5 Press the [SET] button after designating the desired position using the [Left], [Right], [Up] and [Down] buttons. � The zone position will be set.
RET TOP END
Step 2 Confirm that the cursor is on "1" of "1/8" displayed on the top of the page, and then press the [Left] button or [Right] button to select the desired zone number. When an asterisk (*) is displayed next to the zone number, the selected zone number is already in use. Step 3 After completing the zone number selection, press the [SET] button. � The zone setting page will be displayed.
Step 6 Move the cursor onto "SCALE" and press the [SET] button. Step 7
**ZONE NUMBER 1/8** POSITION SCALE PUSH SW PUSH SW
SET DEL RET TOP END
Adjust the size of the zone by pressing the [Left], [Right], [Up] and [Down] buttons. Vertical size can be adjusted using the [Up] and [Down] buttons and horizontal size can be adjusted using the [Left] and [Right] buttons. Click the [SET] button after completing the settings. Step 8 Move the cursor onto "SET" and press the [SET] button. � The privacy zone settings will be complete and the zone number selection page will be displayed.