KENWOOD XD-355E
Instrukcja Obsługi

RADIO OPERATION
Tuning
ON/STANDBY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired frequency band. (FM ST, FM or AM) 4 Press the TUNING/TIME (%UP or �DOWN) button to tune into the desired station.

1 Press the

1 2,3, 5,6

Manual tuning : 4
Press the TUNING/TIME (%UP or �DOWN) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station.

Auto tuning :
When the TUNING/TIME (%UP or �DOWN) button is pressed for more than 0.5 second, scanning will start automatically and the tuner will stop at the first receivable broadcast station.

4 1

2,3, 5,6

Notes : � When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically at that point. � If a weak station signal is found during auto scan tuning, the station will be skipped. � To stop the auto tuning, press the TUNING/TIME (%UP or �DOWN) button again. � When a RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear. 5 To receive an FM stereo transmission, press the TUNER (BAND) button so that the �ST. indica� tor on the display lights up. � � � will light up when an FM broadcast is in stereo. 6 If the FM reception is weak, press the TUNER (BAND) button so that the �ST. indicator goes � off. The reception changes to mono, the sound becomes clearer.

After use :
Press the ON/STANDBY button to enter the standby mode

Note : � The last station turned in will be recalled, even
after changing the tuning band or the function, or after switching the unit to the standby mode.

�

19 EN