Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 27 (kliknij aby zobaczyć)
To recall stations that have been stored in memory (PTY search)
3,5 4
You can search for desired stations by specifying the programme type (see page 23 - 24) from among the stations that have been stored in memory.
2 1
1 Press the
on.
POWER button to turn the power
2 Press the TUNER (BAND) button to select the
FM ST or FM band.
3 Press the PTY button. � �PTY TI� and �SELECT� will appear alternately 4
3
for about 6 seconds. Within 6 seconds, press the P CALL (4 1 . or ¡ ¢) button to select the programme type you want. Each time the button is pressed, the programme type will appear. If the button is held down for more than 0.5 second, the programme type will appear continuously. Whilst the selected programme type is flashing (within 4 seconds), press the PTY button again. After the name of the selected programme type has been lit for 2 seconds, �SEARCH� will appear, and the search operation will start.
�
5
4
�
5
Notes :
If the programme type has changed from flashing to steadily lit and the PTY button is pressed, nothing will happen. in this case, start again from step
3.
Each time a station of the programme type you want is encountered, you will be able to listen to the broadcast. The channel number will flash for about 3 seconds.The station name will flash for 7 seconds, and then remain lit. � If you want to listen to another station of that programme type, press the PTY button whilst the channel number or station name is flashing. The unit will look for the next station of that type. � �NOT FOUND� will appear for 4 seconds, if the requested programme type station is not found.
