Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 41 (kliknij aby zobaczyć)
Section
Setting up the DVD player
10
Important If the setting is incorrect there will be no sound so be sure to read the manuals of the connected components.
1 Move the joystick up or down to select OUTPUT SELECTION in the GEN. OUTPUT SELECTION is highlighted. 2 Click the joystick. Audio output setting menu is displayed. 3 Move the joystick up or down to select the desired audio output setting. The currently set audio output setting is indicated with blue box. The digital output setting selected with the joystick is highlighted.
! 48KHz � A 48 kHz signal is output regardless of the audio sampling frequency. A 96 kHz signal is converted to a 48 kHz signal. (initial setting) ! 96KHz � The signal is output with the same frequency as the audio sampling frequency. With a 96kHz signal, you can enjoy exceptionally high sound quality.
Setting up the DVD player
4 Click the joystick. The selected audio output setting is set.
Notes ! With discs featuring 96 kHz recording, if you select 96KHz, audio is not output from digital output. ! With discs that do not feature a CSS (Content Scrambling System) copy guard signal, a 96 kHz digital signal is output. ! When using this unit with a Pioneer multichannel processor (DEQ-P6600), select 48KHz. If you select 96KHz, no sound will be output when playing discs featuring 96 kHz recordings.
