Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 31 (kliknij aby zobaczyć)
Initial Settings menu
11
Chapter 11
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. Important � In the table below, the default setting is shown in bold: other settings are shown in italics. � Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.
1 Press HOME MENU and select �Initial Settings�.
Initial Settings
2 Use the cursor buttons and ENTER to select the setting and option you want to set. All the settings and options are explained on the following pages.
Digital Audio Out settings
Setting Dolby Digital Out Option Dolby Digital Dolby Digital > PCM DTS Out DTS What it means
Dolby Digital encoded digital audio is output when playing a Dolby Digital DVD disc. Dolby Digital audio is converted to PCM audio before being output. DTS encoded digital audio is output when playing a DTS disc. (Noise will be output if your amplifier/receiver is not compatible with DTS audio.) DTS audio is converted to PCM audio before being output. 96kHz digital audio is output as is at 96kHz. 96kHz digital audio is converted to 48kHz for digital output. MPEG encoded digital audio is converted to PCM audio for digital output. MPEG encoded digital audio is output as is.
English Deutsch Français Italiano Nederlands Español
DTS > PCM 96 kHz PCM Out 96kHz 96kHz > 48kHz MPEG Out MPEG > PCM MPEG
