SHARP XLMP110E
Instrukcja Serwisowa

XL-MP110H/MP110E
(4) PLL system check.
When a disc is loaded, start play operation.

The HF waveform is normal, but the TOC data cannot be read.

Check the PDOUT waveform. (Figure 6)

Check around Pins 1,2,26,29 and 80 on IC1.

Figure 6

(5) Others. The HF waveform is normal and the time is displayed normally, but no sound is produced. Or the sound has dropouts.
Is pin 35 (C2F) on IC1 "L" ? No There are too many error flags on a damaged disc which makes error correction impossible.

Yes If OK, Check the unit.

Check again using a known good disc.

7�4