JVC XLR5000BK
Instrukcja Serwisowa

XL-R5000BK How to check for 3CD and CD-R
1. Special tools and CDR & CDRW Disc.
CD TEST DISC:CTS-1000 CD-R for Audio CD-RW for Audio Note: 1. Be sure to use general audio CD-R and CD-RW disks available on the market for this set. 2. This set is incapable of playing any CD-R or CD-RW disk for the personal computer. 3. The CD-RW disk can be played only by the player compatible with the CD-RW disk. 4. The CD-R disk that has not been finalized after writing can be played by the CD-R unit only.

How to check up the CD-R unit whether it is normal (OK) or defective (NG ).
* For checking up the CD-R unit for normal or abnormal status, open the Service Menu.

1. How to open the Service Menu.
1) Press both the DIGITAL key and POWER key simultaneously. 2) Press the MENU key. The following menu items appear one after another on the FL Display.

1 2 3 4 5 6 7 8

"READ_RID_CODE" JVCCA01089231 "ENG_SETUP____" 0 "3CD_FC_ADJ___"

The menu items from 1to 8can be repeatedly shown on the display by the JOG dial or the FWD/BWD key on the remote controller. If the SET key is pressed while a menu item is shown on the display, the setting value of the item appears on the display. The menu item 6shows the self-diagnosing result of the CD-R

********
"3CD_TRK_ADJ__"
/ / / / / / / /

unit. After the self-diagnosing result appears on the display, quit the Service Menu by turning off the set, otherwise you cannot access the further menu items. For details of each menu item, refer to the next page.

"READ_CDR_C1__"

below 200Hz

"CDR_SELFDIAG."

****
If "DIAG NG" message appears, replace the CD-R unit with new one.

DIAG OK or NG "SYSTEM_AGING_" COPY "READ_VERSION_" PLAY ERAS

*********

1-4