To connect digital components
This unit is equipped with two types of digital input/output terminals�coaxial and optical.
When connecting a digital component equipped with a digital input terminal
The following connection allows you to perform digital-todigital recording (from 3-CD Changer onto the other component).
When connecting a digital component equipped with a digital output terminal
The following connection allows you to perform digital-todigital recording on this unit (through the digital terminals).
Before connecting digital optical cable, remove the protective cover from the terminal. Protective plug
COMPU LINK-4 (SYNCHRO)
MODE CDR TD
Audio component with digital output
DIGITAL IN COAXIAL OPTICAL
DIGITAL OUT COAXIAL OPTICAL
To coaxial digital output
To optical digital output
Digital coaxial cable (not supplied)
Digital optical cable (not supplied)
Digital coaxial cable (not supplied)
Digital optical cable (not supplied)
Before connecting digital optical cable, remove the protective cover from the terminal. Protective plug
COMPU LINK-4 (SYNCHRO)
MODE CDR TD
To coaxial digital input
To optical digital input
Audio component with digital input
DIGITAL IN COAXIAL OPTICAL
DIGITAL OUT COAXIAL OPTICAL
When this unit cannot recognize a component connected to the DIGITAL IN COAXIAL or OPTICAL terminal, �UNLOCK� appears on the display. If this happens, press PLAY 3 for 3-CD Changer so that the connected component will be recognized.
� When playing back an MP3 disc, digital signal cannot be output from this unit. Connect also this unit to LINE OUT (PLAY) jacks by using audio cords with RCA pin plugs (supplied). � Digital signal cannot be output through the DIGITAL OUT terminals while recording digitally from an external component.
NOW, you can plug in the unit and other connected components FINALLY!
