100 W x 2 Ch at 0.04% THD 280 W x 1 Ch at 0.1% THD 140 W x 2 into 2 ohms at 0.1% THD Discrete Dual Differential Inputs Discrete MOSFET Outputs
� � � � �
MOSFET Switching Power Supply Switchable Hi Power/Hi Current Mode Variable 50-200 Hz Hi-Pass/Lo-Pass Filter 40 Hz EQ Boost, Hi Level In RCA Passthrough
Specifications Circuit System
OTL (output transformerless) Circuit Pulse Power Supply RCA Pin Jacks High Level Input Connector Speaker Terminals � through out pin jacks 1-8 ohms (stereo) 2-8 ohms (when used as bridging amplifier)
50/100 W x 2 (20-20 kHz, 0.04% THD), at 4 � ) 70/140 W x 2 (20-20 kHz, 0.1% THD), at 2 � ) 140/280 W x 1 (20-20 kHz, 0.1% THD), at 4 � )
Frequency Response Harmonic Distortion Input Level Adjustment Range High-Pass Filter Low-Pass Filter Low Boost Power Requirements Power Supply Voltage Current Drain
5-50 Hz (+0.5/-3 dB) 0.005% or less (at 1 kHz, 4 �) 0.2-4.0 V (RCA pin jack); 0.4-8.0 V (High level input) 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 0-10 dB (40Hz) 12 V DC car battery (negative ground) 10.5-16 V At rated output: 26A (4 ohm hi voltage mode) Remote input: 2 mA Approx. 282 x 50 x 320 mm (111/8 x 2 x 12 5/8 in.) (not incl. projecting parts and controls) 3.3 kg (7 lb. 4 oz.) (not including accessories) Mounting Screws (4); Terminal Cap (1)
Dimensions (w/h/d) Weight Supplied Accessories
22
Design and specifications subject to change without notice.
