Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 18 (kliknij aby zobaczyć)
English
Recording
An audio signal from a variety of sources can be recorded by using either digital or analog input as required.
Things to know before recording ����������
� � � It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Carefully read the �Rule on Digital Copying� on page 31. The MD recorder supports the following sampling frequencies for digital sources DIGITAL 1 and DIGITAL 2 and lights the sampling frequency being received on the display. 32 kHz, 44.1 kHz and 48 kHz Recording level adjustment: When recording a digital input, the recording level is automatically set correctly. When recording an analog input, it is necessary to adjust the recording level properly. The accidental erasure protect tab is provided on the back of an MD cartridge to prevent accidental erasure or recording. It must be set to the close position before recording. Otherwise, �DISC PROTECTED� will appear when you try to record a signal to the MD. Accidental erasure protect tab
Close Open
�
�
For recording or editing
For protecting erasure
� � �
When you stick an adhesive label onto the MD cartridge, adhere it securely. If it peels off, ejection trouble, etc. will occur. Be sure that the MD is not the Playback-only type one. (See �Two disc types� on page 32.) Be sure that the MD has enough space for recording. If not, carry out ERASE ALL or ERASE function to erase all the tracks or desired tracks in the MD. You can check the recordable remaining time of the MD. (See �To display the remaining recording time� on page 16.)
Recording operation
1 Load a recordable MD. 2 Press ¶ REC PAUSE on the main unit or the remote control unit.
REC PAUSE
or
The MD recorder enters Rec/Pause mode. The REC and (Pause) indicators light up and the first track to be recorded is displayed. Also, the disc indicator lights in red. Example) When 14 tracks are already recorded