Adjusting Tone in MANUAL Sound Mode
1 Press the A.C.BASS button on the remote control until �MANUAL� appears on the display.
The indicator lights up on the remote control�s display. (If the step.) indicator is already lit, you can skip this
2
Press the A.C.BASS button for 2 seconds or more.
The following tone level meter appears on the remote control�s display.
(For 2 seconds) A.C.BASS button Bass level bar Fixed bars (flat level) Treble level bar
¢: Press to select Treble.
VOLUME +/� : Press to adjust the level.
4: Press to select Bass.
3 4
To change the bass level, press the 4 button. The bass level bar blinks. Then, press the VOLUME + or � button to move the bass level bar up or down ( in 3 steps each). To change the treble level, repeat above step 3 except for pressing the ¢ button.
To exit MANUAL sound mode: � Wait until the display automatically returns to the original one. � When no level bar is blinking, press a button other than the 4 and ¢ buttons on the remote control. � When the level bar is blinking, press the A.C.BASS or 7 button on the remote control.
Notes
� If you leave the unit for 8 seconds in step 2, the display returns to the original one. In this case, repeat from the step 2. � If you leave the unit for 16 seconds in step 3 or 4, the display returns to the original one. In this case, repeat from the step 2. � The tone levels set here is stored in memory.
6
English
You can adjust the tone by changing the bass and treble.
