Dla tego produktu nie napisano jeszcze recenzji!
Using the timer
Using the record timer
You can set the timer to record something from the tuner at a time when you may not be around. For example, you might want to record a program on the radio that is broadcast while you're at work. During the actual recording, the volume is automatically set to minimum until you change it again. Once the recording is finished, the timer is switched off, and has to be reset if you plan to record another broadcast while you�re out. 1 Prepare the tape deck for recording. � load a tape � check for blank space on the side
ENTER
9
4 Use � and 5 to select REC TIMER then press ENTER.
REC. TIMER
STANDBY /ON
SLEEP/ TIMER
Use the 5 and � buttons to change the currently displayed option in the menu. Press ENTER to select. Press 7 anytime to cancel and exit the menu. 5 Set the recording start time: First, set the hour: Use � and 5 to change the flashing hour display, then press ENTER.
FM / AM
7
ON
AM
7:OO
Next, set the minute: Use � and 5 to change the flashing minute display, then press ENTER.
you will record (recording automatically starts in the 3 (forward) direction) � set the reverse mode (p. 20) 2 Set up the tuner. Switch to the tuner, and tune into the station (see page 18 for more detailed instructions on this). 3 Press TIMER (SLEEP/TIMER) repeatedly until you see WAKE UP/REC (TIMER SET UP?) then press ENTER.
ON
AM
7:3O
6 Set the recording end time: First, set the hour: Use � and 5 to change the flashing hour display, then press ENTER.
OFF
AM
8:OO
English
Next, set the minute: Use � and 5 to change the flashing minute display, then press ENTER.
WAKE UP / REC TIMER SET UP ?
OFF
AM
8:15
After pressing ENTER, the display shows you the settings you�ve just made, including the switch on and off times and the station frequency.
35
En
|