AIWA XPEV501R
Instrukcja Obsługi

3-252-374-21 (1)

WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Notes
� The indicator sections of roughly shows the remaining battery power. One section does not always indicate one-fourth of the battery power. � Depending on operating conditions, the indicator sections of may increase or decrease.

Notes on using the dry batteries
� Be sure to remove the AC power adaptor. � When the batteries are depleted, replace both batteries with new ones.

Portable CD Player
Operating Instructions

To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don�t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

To use the AC power adaptor (C) 1 Connect the AC power adaptor (not supplied) to an
AC outlet.

CAUTION
The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority.

Playing a CD
To insert a CD 1 Slide OPEN to open the lid (A). 2 Fit the CD to the pivot, then close the lid (D).
� This CD player can play discs recorded in the Compact Disc Digital Audio (Audio CD) format. � This CD player can play CD-Rs/CD-RWs recorded in the Compact Disc Digital Audio (Audio CD) format, but playback capability may vary depending on the quality of the disc and the condition of the recording device. � This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

CAUTION

XP-EV501R/EV501C
Sony Corporation ©2003 Printed in China

� INVISIBLE LASER RADIATION WHEN OPEN � DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENT

Notes

http://www.aiwa.com/
The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).

CD player (front)
Strap holes 1P-MODE/ 2SOUND

The illustrations below show the model XP-EV501R.

Owner�s Record
The model number and the serial number are located at the rear of the CD player. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Aiwa dealer regarding this product. Model No. _____________________________________ Serial No. ______________________________________

Display 3r/t (skip/search) 4ca* (play/ pause)/ENTER 5s(stop)/OFF/ CHARGE DC IN 4.5 V (external power input) jack \ (headphones) jack

For the customers in the USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: � Reorient or relocate the receiving antenna. � Increase the separation between the equipment and receiver. � Connect the equipment into an outlet on a circuit � Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

To operate the CD player
Button/Switch 1 P-MODE/ (play mode/repeat) Function/Operation Press repeatedly until the play mode you want appears in the display. No indication: Normal play �1�: Single play �SHUF�: Shuffle play �PGM�: PGM (program) play To repeat the play mode you selected, press and hold until � � appears. To cancel it, press and hold again until � � disappears. 2 SOUND Use to emphasize the bass-boosted sound. Press repeatedly to select or . enhances more than .*1 Press r or t once to find the beginning of the current/next track. Press r or t repeatedly to find the beginning of the previous/succeeding tracks. Press and hold r or t to go backward/forward quickly.

A
OPEN

7VOL +*/�
*The button has a tactile dot.

6HOLD

CD player (rear/inside)

3 r/t (B SKIP/F SKIP) (skip/search)

B
Power Sources
To use the batteries (B)
Use only the following batteries for your CD player:

Dry batteries
� LR6 (size AA) alkaline batteries (not supplied)

Open the battery compartment lid.

Insert the ( end first (for both batteries). 8E�A�S�S

Rechargeable batteries
Charge the rechargeable batteries before using them for the first time. � Commercially-available size AA Ni-MH rechargeable batteries of 1.2 V DC, 700 mAh

4 ca(play/pause)/ Press to start playing. Press again ENTER to pause playing. To play from the first track, press for 2 seconds or more while the CD player is stopped. Press to enter the selected track for the PGM play. 5 s(stop)/OFF/ CHARGE(s) 6 HOLD Press to stop playing. Press also to start charging. Use to lock the controls on your CD player or remote control to prevent accidental button presses. HOLD on the CD player works only for the player, while HOLD on the remote control works only for the remote control. 7 VOL+/� 8 E�A�S�S*
2

Display
Sound mode Play mode

Remote control (XP-EV501R only) To insert the batteries
4ca 3tF SKIP

1 Open the battery compartment lid on the rear of your CD
player.

2 Insert two batteries by matching the ) to the diagram
7VOL 2SOUND
in the battery compartment and close the lid until it clicks into place.

Press (slide for the remote control) to adjust the volume. Set to ON to protect against sound skipping.*
3

3 When using the rechargeable batteries, connect AC
CHG Track number Playing time 6HOLD Remaining battery power Headphones jack 5s 3rB SKIP
power adaptor (not supplied) to the DC IN 4.5V jack of your CD player and an AC outlet, then press s/ OFF/CHARGE to start charging. The CD player charges the batteries. The �CHG� indicator turns on in the display and the indicator sections of light up in succession. When the batteries are completely charged, the �CHG� and indicators get turned off. If you press s/OFF/CHARGE after the charge has already been completed, the indicator flashes and �Full� appears in the display. Disconnect the AC power adaptor.

Note
Use only the supplied remote control. You cannot operate this CD player with the remote control supplied with other CD players.

*1 If the sound is distorted when using the SOUND function, *2 turn down the volume.Anti-Shock System E�A�S�S = Electronic *3 Sound may skip: � if the CD player receives stronger continuous shock than expected, � if a dirty or scratched CD is played or � when using poor-quality CD-Rs/CD-RWs or if there is a problem with the recording device or application software.

4

To remove the CD
Remove the CD while pressing the pivot (E).

Battery life* (approx. hours)

C
to an AC outlet DC IN 4.5 V AC power adaptor (not supplied)

D
Label side up

(When the CD player is used on a flat and stable place.) Playing time varies depending on how the CD player is used. E�A�S�S ON Two Sony alkaline batteries LR6 (SG) (produced in Japan) 50

(Continue to the reverse side)

OFF 40

\

E

* Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association).

To check the remaining power of the batteries
You can check it in the display. Replace the batteries when � Lo batt* � flashes.

Headphones

* Beep sounds only when the CD player is set to sounds beep. See �To turn off the operation beep sound� on the reverse side.