Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
Storing the station names
� Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters per station.
4
To return to normal radio reception, press (LIST) for two seconds.
Tip To erase or correct a name, enter �_� (under-bar) for each character.
Displaying the station name
Press (DSPL) during radio reception.
Storing the station names
1 2 3
Tune in a station whose name you want to store. Press (LIST) for two seconds.
Each time you press (DSPL), the item changes as follows:
$ Station name* $ Frequency $ Clock
Enter the characters. 1 Rotate the dial clockwise to select the desired characters. (A n B n C n ··· Z n 0 n 1 n 2 n ··· 9 n + n � n * n / n \ n > n < n.n_)
* If the station name of a station is not stored, �NO NAME� appears in the display for one second.
If you rotate the dial counterclockwise, the characters appear in the reverse order. If you want to put a blank space between characters, select �_� (underbar). 2 Press (4) (n) after locating the desired character. The flashing cursor moves to the next space.
After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order.
Tip The Motion Display mode can be turned off. (See �Changing the sound and display settings� on page 15).
If you press (1) (N), the flashing cursor moves to the left. 3 Repeat steps 1 and 2 to enter the entire name.
