Press SPEED to select the recording speed.
Each time you press SPEED, the recording speed changes as follows: 4x � 2x � 1x � 4x � ... � The recording speed is set to the 4x speed as the initial setting. Normally, you don�t need to change the recording speed.
SPEED REPEAT
English
4x 2x 1x
1 TRACK ALL
Selected speed indicator lights up.
4
Press AUTO REC.
� The AUTO REC indicator flashes and recording starts from the beginning track of the disc. � The TRACK indicator of the track that is currently recording flashes. � The unit stops recording and ejects the disc automatically when the recording is finished.
AUTO REC
To cancel recording during recording
Press and hold 7 for more than 2 seconds. Important note When you cancel recording, the disc that is currently recorded cannot be used any more. When the disc is a CD-RW disc, erase the recorded data to use again.
NOTES
� When the recordable time of the CD-R or CD-RW disc is shorter than that of the source audio CD, the OVER indicator flashes and recording stops. Remove the disc and insert a disc that has enough recordable time. � When you insert an improper disc to the disc tray, the TRACK indicator (error message) flashes (see page 30), and recording stops. Change the disc to the proper disc. � A CD-R or CD-RW disc that is recorded by the AUTO REC function is finalized automatically. It does not need to be finalized separately. � Use a blank CD-R or CD-RW disc for the AUTO REC function. You cannot use a disc that is already recorded for the AUTO REC function. � When your CD player cannot play the CD-R or CD-RW disc that is recorded in the 4x speed mode, try other speed mode (2x or 1x). (Some CD-R or CD-RW discs that are recorded in the 2x or 1x speed mode may not be played back on your CD player.) � You cannot hear the sound of a CD during recording regardless of the recording speed.
