Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
INTERFACES
This set has Audio & Video input and output terminals, which allow direct connection to external equipments for playing back programs. VIDEO PLAYBACK 1.Making use of AV input terminals The figure below shows how to connect the AV input terminals of the TV set to the VCR, VCD or other video equipment.
Press the AV button on the remote control (or make use of the SYSTEM menu) to select AV mode, and �AV� will be displayed on the screen. The picture shown on the screen is the program from the video equipment. NOTE: The VCR signal can be inputted by the antenna input of the TV set, but the quality of the picture and sound will be better if the AV mode is used. RECORDING FROM THE TV SET The figure below shows how to connect the TV set to the video equipment
Press the AV button on the remote control (or make use of the SYSTEM menu by pressing the MENU button) to set the receiver to TV mode, and choose the desired channel. Note: the following should be avoided during recording. * Changing the current channel accidentally.
