Adjusting the bass and treble
The simplest way to shape the sound is by adjusting the amount of bass and treble. Note: The bass and treble controls have no effect when using the DSP modes, or when the Dolby/DTS mode is set to anything other than AUTO, STANDARD or SURROUND
OFF.
1 2
Press SYS then SOUND CONTROL. Use the @ or # buttons to select BASS or TREBLE.
3 4
Use the % and � buttons to adjust the sound. You can see the current level in the display. Press ENTER to set the level.
Using P.Bass
In addition to the standard controls for adjusting bass and treble, this system has a P.Bass feature. Switch this on to further extend the bass. Note: P.Bass has no effect when listening through headphones. � Press SYS then P.BASS to switch P.BASS on or off.
