Child Lock
� You can check the timer settings in standby by pressing TIMER/CLOCK ADJ. This system has a child lock feature that makes the front panel buttons and controls inoperative. This is useful when you have set the timer and don�t want the recorder accidently turned on before the timer recording has started. 1 Switch the system into standby then press ENTER. . 2 Use the / (cursor left/right) buttons to select the KEY LOCK display. On the front panel use and . 3 Press ENTER. The current setting is shown in the display. 4 Use the / (cursor up/down) buttons to select LOCK ON or LOCK OFF. On the front panel use and . 5 Press ENTER to confirm.
Turning the record timer on/off
1 Press TIMER/CLOCK ADJ. 2 Use the / (cursor left/right) buttons to select REC. On the front panel use and 3 Press ENTER.
4 Use the / (cursor left/right) buttons to select ON or OFF. On the front panel use and . � You must have the timer set (see previous page) to select ON. The record timer switches on and off according to your previous settings. 5 Press ENTER. ) show in the REC and the timer indicator ( display when you select ON.
� You will have to use the remote control to switch child lock off.
