|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Getting started
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an amplifier, MD, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound. When you make the digital connection, we recommend also to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.
English
Red
The unit
AUDIO OUT
CENTER SUBWOOFER
PCM / STREAM COAXIAL OPTICAL
DIGITAL OUT
White
REAR RIGHT LEFT FRONT RIGHT LEFT
VIDEO
VIDEO OUT
COMPONENT Y PB PR
AV COMPU LINK
S-VIDEO
Optical digital cable (not supplied)
Getting started
Coaxial digital cable (not supplied) Audio cable (supplied)
Digital equipment White
IN
LEFT
IN
OPTICAL
AUDIO
RIGHT
DIGITAL
COAXIAL
Red The OPTICAL jack is protected by the hinged cover. To connect the optical cable to the jack, press the cover with the plug and connect it to the jack inside in the correct direction.
� For digital connection, connect the unit's DIGITAL output (OPTICAL or COAXIAL) to the digital input of an audio equipment using an optical or a coaxial digital cable. NOTES
� When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the �DIGITAL AUDIO OUTPUT� setting in the �PREFERENCE 2� on-screen display correctly according to the connected audio equipment. If the �DIGITAL AUDIO OUTPUT� is not set correctly, loud noise may be generated from speakers, causing damage to them. See �DIGITAL AUDIO OUTPUT� on page 59. � When you connect the unit's DIGITAL output to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy surround sound, the unit's �COMPRESSION� setting in the �PREFERENCE 2� on-screen display and all settings in the �SPK. SETTING� display are invalid. Make appropriate surround audio settings by the decoder.
21
|
|
|
> |
|
