5510 � 5520 � 5525 � 5530 5535 � 5540 � 5550 � 5560
� Extend cable and connect to mains ensuring cable is not twisted. Move foot pedal forward to reel cable in/out as required. Move foot pedal back to lock extended cable in place. Press foot pedal to rewind (please hold the plug to prevent it striking you or the machine). � Press on/off foot pedal to activate cleaner. (Press on/off foot pedal to place cleaner on standby. Indicator will illuminate 5550/60). � To increase/decrease suction, adjust control on cleaner body 5510/20/25/30/35/40 or hose handle 5550/60. Suction can also be regulated on hose handle 5510/20/25/30/35/40 by opening/closing aperture.
Before you start, please refer to the electrical safety instructions on page 63 (Great Britain only). Please keep both flaps open when reading these operating instructions.
B Dust bags
Tools for your Vacuum Cleaner
Telescopic tube 5510 saver tube 5520/25/30/35/40/50/60
C BBack D w E F X G H I s KTool
Hose handle 5510/20/25/30/35/40 Hose handle with remote control 5550/60 Carpet/hard floor nozzle Turbo nozzle 5540 Power nozzle 5560 Crevice nozzle Upholstery nozzle 5510/20/25/30/35/40 Dusting brush 5510/20/25/30/35/40 Combination nozzle/brush 5550/60 holder 5510/20/25/30/35/40 G H I J K L A B C D E F
Your Vacuum Cleaner features
X Mains cable
Y z 0 1 2
Cable foot pedal Suction control regulator 5510/20/25/30/35/40 Dust bag full indicator 5510/20/25 CleanStream filter indicator 5530/35/40/50/60 Standby/Overheat Indicator: Indicator will �illuminate� when cleaner is on standby 5550/60, and �flash� if cleaner overheats 5530/35/40/50/60 Dust bag full indicator 5530/35/40/50/60 Cover release for dust bag/filter compartment Hose connection Power outlet (for the use of power driven tools) 5530/35/40/50/60 Back saver carrying handle holder (for attachment to hose handle)
Ensuring your safety
The cleaner is for domestic use only and has been designed to ensure maximum safety and performance. Please follow these simple precautions:
L M N O P Q R S T U W
The cleaner is double-insulated so it must not be earthed The cleaner is only to be used by adults Always store in a dry place Do not use to pick up liquids
M N
Avoid sharp objects O Do not pick up hot cinders or lighted cigarette ends Do not use near flammable gases Avoid tugging on the mains cable and check cable regularly for damage Note: Do not use cleaner with a damaged cable. If damaged the cable should be replaced at an Electrolux Service Centre The plug must be removed from the socket-outlet before cleaning or maintaining the appliance All service and repairs must be carried out by authorised Electrolux service staff P
3 l m 4 g KTool w i 5 k
5510/20/25/30/35/40 Hose handle with suction regulator, power nozzle on/off switch, power nozzle socket 5550/60 On/off switch Temporary parking position for floor nozzle and extension tubes when in use Storage slot for floor nozzle and extension tubes
Getting the best results
Using Carpet/Hard floor nozzle
v u
45
Carpets: Use floor nozzle with lever in this position. Reduce suction power for loose rugs. Hard floors: Use floor nozzle with lever in this position.
6
Using Turbo nozzle 5540 or Power nozzle 5560
Getting started
� Check dust bag is in place. � Insert hose 5510/20/30/35/40 and pins 5550/60 until catch clicks to engage (Press catch to release). � Attach telescopic tube 5510 or back saver tube 5520/25/30/35/40/50/60 to hose handle. � Attach floor nozzle to tube. � Use back saver tube 5520/25/30/35/40/50/60 in positions shown for normal cleaning or cleaning under low furniture. To adjust, press catch and twist lower tube.
Precautions: Only use nozzle on carpets with a pile depth under 15 mm. Do not use on animal skins or rugs with long fringes. To avoid damaging your carpet, do not keep nozzle stationary whilst brush is rotating. Do not pass nozzle over mains cable and switch off nozzle immediately after use. � Attach turbo nozzle 5540 or power nozzle 5560 to tubes. � Connect power nozzle plug to hose handle socket and use clips to secure cable to tube 5560. � Push on/off switch to activate power nozzle 5560. � Note: Suction can also be regulated on turbo nozzle by opening/closing air vent 5540.
