Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 3 (kliknij aby zobaczyć)
z71xx_ifu.qxp
2005.11.11.
11:37
Page 4
BEFORE STARTING
1. 2. 3.
Always operate the cleaner with the dust container installed. Always operate the cleaner with the filter set property installed.
1
2
3
Insert the hose until the catch clicks to engage (press the catch to engage hose). 4. Attach the metal extension tubes to the hose handle and the floor nozzle. 5-6. Pull out the cable and plug it in. Press the foot pedal to rewind the cable (take hold of the plug to prevent it striking you). 7. Press the On/Off button with control your foot to start the vacuum cleaner. Adjust the suction power by using or the suction control on the hose handle.
GETTING THE BEST RESULTS
4
5
6
Hard floors: Use the dual purpose floor nozzle with the left pedal in position (8.) Carpets: Use the dual purpose floor nozzle with the left pedal in position (9.) Turbo nozzle: Use the turbo nozzle to remove pet hairs and other stubborn fibres (Z7120). Reduce suction power for rugs and fabrics. Upholstered furniture: Use the upholstery nozzle.
7
Skirting boards, crevices, corners, etc.: Use the crevice nozzle. Above the floor surfaces and some upholstered furniture: Use the dusting brush.
