Turn the thermostat knob to a medium position to restart the appliance. After letting the appliance run for at least half an hour replace the previously removed food into the **** -star compartment. When defrosting it is not necessary to remove the foods from the inner door and the refrigerator compartment.
Important
A temperature rise of the frozen food packs during defrosting may shorten their storage life. Never use sharp metal tools to scrape off frost from the evaporator as you could damage it beyond repair.
Changing the Light Bulb
Should the light fail to work you can change it as below: Disconnect the appliance from the electricity supply. Remove the lamp cover retaining screws, then take the lamp cover off in the direction of the arrow and the bulb can be changed. (Type of the bulb: 230 V, 15 W, E 14 thread) After changing the bulb replace the lamp cover, and retaining screws and reconnect the appliance to the electricity supply.
When the appliance is not in use
When the appliance is not in use for long periods disconnect from the electricity supply, empty all of the food and clean the appliance, leaving the door ajar to prevent unpleasant smells.
Something N ot Working
If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre.
Problem No power to the appliance Possible Cause No power at the socket. There is a power cut. The fuse has blown. Thermostat control is set at �0�. The appliance is located in an unsuitable position. The thermostat control is set too low. The temperature in the appliance is too low Excessive frost and ice has built up The appliance is noisy. The thermostat control is set too high. The door has been left open. Something is obstructing the door. The door gasket is dirty. The appliance is not level. Solution Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. Check the thermostat control setting. Check the ambient temperature is within the appliances operating limits of 16 °C to 32 °C. Check that the thermostat control knob is turned to the correct setting relative to ambient conditions. Set the thermostat control knob to a lower position. Check the door has not been left open. Check nothing is preventing the door from closing. Check the door gasket is intact and clean. Check if the appliance stands stable (all four feet should be on the floor).
The temperature in the appliance is too high
If after the above checks your appliance still does not operate correctly, contact your local Service Force Centre. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. 10
In-guarantee customers should ensure that the above checks have been made, as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
