A = Auxiliary burner SR = Semirapid burner R = Rapid Burner These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 9.
Fitting the lid
We recommend the lid hinge block are fitted before installing the hob into the worktop.
To install the lid onto the hob, proceed as follows: a. Remove the right and left hand grid blocks fitted to the back of the hob, by unscrewing the relevant screws (Fig. 10) b. Fit the lid hinge blocks onto the hob, using the original screws, ensuring that the relevant shims are fitted between the hinge blocks and the hob (Fig. 10); c. Fit the left hand lid hinge (marked S) into the hinge block (Fig.11); d. Carry out the same operation with the right hand lid hinge (marked D).
FO 2035
Fig. 10
Adjusting the lid balance
To adjust the lid balance, turn clockwise or anticlockwise the central screw of the right- and left-hand hinges (Fig. 12).
