� Mount the chimney holder close to the ceilingwith the rawl plugs and the screws. Warning! Be careful that it is centered over the hood and horizontally aligned. Chimney holder
Fig. 9
Centre line � Hang the hood on the wall again. Additional hanging points
Hooks
Chimney holder Chimney fixing points
Fig. 10
Tube � Secure it with the 2 lower screws.
Fitting for ducting
� Connect a tube between the hood air outlet and the wall or roof exhaust channel.
Chimney
Recirculation spigot Supply cord
Fitting for recirculation
� Mount the recirculation spigot with the 4 screws supplied.
Air outlet
Mounting the chimney
� Connect the supply cord to the mains. � Place the chimney and fix it to the top chimney holder with the two screws supplied. � Lower the bottom part of the chimney to the top of the hood. Lower screws
