Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
How to use your Refrigerator-Freezer
Starting, setting the temperature, switching off
The refrigerator and freezer compartments can be used independently. m The entire cabinet unit will be de-energized after the power supple plug has been pulled out of the socket.
Freezer Compartment
This freezer, is marked , and is suitable for freezing fresh foodstuffs and keeping food for long periods.
Switching on
1... Insert the power plug in a household Ac outlet. 2... Press the power switch «a» on the panel to turn on the power. 3... If the temperature is too high in the cabinet, the temperature alarm sounds. Turn off the alarm by pressing the alarm shut-off button «h».
Freezing of food
Freezing should take place as quickly as possible, in a maximum of 24 hours. The procedure for this is as follows: 1... Push the «SUPERFROST» button. The yellow lamp «e» will light up. � If the freezer was switched off and empty, 3 hours prior to placing the food to be frozen. � If the freezer is already operating and contains frozen food, 24 hours before placing the food to be frozen. 2... The maximum amount which can be frozen in 24 hours is indicated in the section «Technical Features». 3... Place the food to be frozen inside the lower compartment of the freezer. You can also use the top shelf. If necessary, the highest capacity of freezing is reached removing the lower basket. 4... Red light «h», may be on for a few hours during freezing process. Switch-on time for
this light will vary according to amount of food being put in for congelation and time while door remains open. 5... 24 hours after the food in the freezer, the freezing process can be regarded as complete. 6... Push the «SUPERFROST» button. The yellow lamp «e» will go out.
Setting the temperature
The recommended temperature � for the refrigerator is +4°C / +6°C � for the freezer is -18°C / -20°C Use the temperature adjustment buttons «b» (refrigerator) and «f» (freezer) to set the temperature. Press «+» to set a higher temperature. Press «-» to set a lower temperature. Keep pressing until the desired temperature is shown in the temperature display. The display will then stop flashing. The freezer temperature display shows the current temperature inside the cabinet. The refrigerator temperature display shows «OF» until the temperature inside the cabinet reaches + 9°C.
Switching off
To switch off the entire cabinet Press the power switch «a» on the panel to switch off the cabinet. To avoid accidentally switching off the appliance, the power switch must be kept pressed for about 1 second. Disconnect the power plug from AC outlet. To switch off only the refrigerator or freezer Switch off the refrigerator or freezer using b «+» for the fridge or f «+» for the freezer until «OF» appears in the display.
