|
Dla tego produktu nie napisano jeszcze recenzji!
Dishwasher loading instructions and racks provided
Upper rack:
Multi-purpose support (A): 1) Depending on the position, for longhandles utensils, cups and glasses. May be used in three different positions. Crockery holders (B): Depending on the position, for example plates, cups and long-stemmed glasses. Revolving glass support (C): 2) Depending on the position, for example small or long-stemmed glasses. Long-handled utensils (e.g. carving forks, knives) must be arranged with the sharp end facing in towards the appliance.
depending on the model
Half Load:
Load the upper rack only. Place the cutlery basket (D) in the upper rack.
Rack height adjustment (also when loaded):
� Lower adjustment: pull out the two rack handles outwards (E) and lower the rack. � Upper adjustment: pull the two handles (E) upwards until the rack clicks into place (Factory setting). The rack must be level on both sides.
Removing the top rack to provide clearance for large items of crockery in the bottom rack:
Open the rack guide retainers (F) on the right and left and remove the top rack. When the upper rack is in place the retainers must always be closed.
Retainer closed Retainer open
F
F
Lower rack:
Depending on the model with fixed or tilting plate holders (G).
Half Load:
Load the lower rack only. Greater washing power, particularly for plates and saucepans.
Cutlery basket (J) or (H):
Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Cutlery basket (D), if provided, for appliances with half load only. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards.
Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. AMH 369 series. 2) Revolving glass support (C) - N. WGH 1000 series.
|
