Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 38 (kliknij aby zobaczyć)
LUBRICATION
The oil level shall lie between the markings on the dipstick. If the level is approaching the �ADD� mark, top up the oil to the �FULL� mark on the dipstick. Never �ll to above the �FULL� mark. The oil is topped up through the hole the dipstick sits in.
ADD FULL
ADD
FULL
8009-159
The dipstick markings
Use engine oil SAE 30 or SAE 10W-30 or, alternately, 10W/40, class SC�SH (over 0 °C/+32 °F). Over +20 °C/+68 °F SAE 40 can be used. Use engine oil SAE 5W-20, class SC�SH (under 0 °C/+32 °F). The engine holds 1.5 liters of oil excluding the �lter (including �lter 1.7 liters).
-20 C
-10 C
0C
10 C
20 C
30 C SAE40
40 C
SAE30 SAE10W-30/SAE10W-40 SAE5W-20 -4 F 14 F 32 F 50 F 68 F 86 F 104 F
8009-140
Engine oils
4. Throttle and Choke Cables, Lever Bearings Lubricate the cable ends by the carburetor with the oilcan. Move the controls to the end points and lubricate again. The throttle cable is also lubricated by the control when the control console is removed.