Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 18 (kliknij aby zobaczyć)
Should the lining up of the furniture door be necessary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly.
PR168
Fix cover (D) on guide (B) until it clips into place.
B
D
PR167/1
Fitting the plinth
Important For the efficient operation of the appliance, it is important that the original ventilation grid is used.
S.I.007
s
s
For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an opening height dimension B=870 mm and a plinth height dimension b=150 mm. For plinth heights greater than a=100 mm, b=150 mm, a cut should be made in the plinth, 580 mm wide, in the centre of the appliance position, leaving a remaining height of a=100 mm, b=150 mm. Attach plinth to the kitchen units.
A = 820 B = 870
a = 100
580
s
25 ÷
80
25
S.I.008
Important The plinth must be positioned at a minimun distance of 25 mm from the door.
