·Remove all securing tapes. ·Wash the inside of the appliance with lukewarm
water a little bicarbonate of soda added (5ml to 0,5 litre of water). Do not use soap or detergent as the smell maylinger. Dry the appliance thoroughly. Do not use detergents, abrasive powders, highly perfumed cleaning products, wax, polishes or products containing alcohol.
·Before inserting the power plug into the outlet and
switching on the cabinet for the first time, leave it standing upright for about 30 minutes, or for 4 hours if it was transported horizontally. Otherwise the compressor may sustain damage. This time will allow the oil sufficient time to return to the compressor.
To start the freezer and thermostat control
1. Plug in the appliance.
Turn the thermostat control to the desired position. 1: The lowest position of the thermostat control results in the highest temperature inside the cabinet. 6: The highest position of the thermostat control results in the lowest temperature inside the cabinet. 0: Off. Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet.
Switching off
Set the thermostat control to the "0" position. Unplug the power supply plug from the wall socket or, alternatively, remove the fuse.
Freezing
You need not press the fast-freezing button when freezing smaller quantities of food during any 24-hour period. In all other cases, press the fast-freezing button approx. 24 hours prior to placing the food in the freezer. Press the fast-freezing button to switch off fast-freezing again about 24 hours after placing the food in the freezer. The yellow fast-freezing lamp remains lit as long as the fast-freezing button is engaged.
