Operating Sequence
WASHING only Before the first wash we recommend that you run a cotton cycle at 95°C, without any laundry in the machine to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start up the machine.
4. Select the required programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
Off
Prewash
95° E60° 60°
Miniprogramme Spin Drain Softeners Rinses Soak
Cottons
Wash Rinse Rinse Hold Drain Spin Dry End
50° 40°
30° 60°
1.Load the laundry
Wool
30° 40° 30° 40°
30° 40°
50°
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
Delicates
Synthetics
The �Start Pause� button light flashes. The display shows the duration of the programme.
5. Select the spin speed or the Rinse Hold option
Press the �Spin Speed� button repeatedly, in order to select the desired spin speed or the �Rinse Hold� option . The relevant light will light up. If you select the �Rinse Hold� option, the machine will stop at the end of the programme with the water still in the tub.
1600 1200 900 700 Spin Speed
P0004
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment . If you wish to carry out the prewash or the soak programme, pour detergent into the appropriate compartment marked .
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.
6. Select the desired options
If your laundry is very dirty, it may be advisable to select the �Prewash� option. If your laundry is lightly soiled and it is possible to reduce the washing time, select the �Quick Wash� option. If your laundry needs an extra rinse, select the �Super Rinse� option. The relevant light illuminates.