5 START PAUSE button
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing and remains lit. To interrupt a programme which is running, depress the START PAUSE button: the corresponding pilot light starts to flash. To restart the programme from the point at which it was interrupted, press the START PAUSE button again.
7 Programme progress display
When you choose the delayed start, the light relevant to the selected delay lights up. After the machine has started, the remaining time is shown by the corresponding indicator light. At the beginning of the programme, only the WASHING light stays on. When the programme has finished, the End pilot light comes on.
9h
6 DELAY START button
This button makes it possible to delay the starting of the washing programme by 12, 9, 6 and 3 hours. The delay you have selected is indicated by the coming on of the corresponding light. You must select this option after you have set the programme and before you press the START PAUSE button. You can cancel the delay time at any moment, before you press the START PAUSE button. If you have already pressed the START PAUSE button, and you wish to cancel the delay time, proceed as follows: � set the washing machine to PAUSE by pressing the START PAUSE button; � press the DELAY START button once, the light relevant to the selected delay goes off . � press the START PAUSE button again to start the programme. Important! The selected delay can be changed only after selecting the washing programme again. � The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the START PAUSE button. After approx. 2 minutes the door can be opened. After you have closed the door, press the START PAUSE button again. The delay start cannot be selected with programmes �DRAIN� and �SPIN�.
�
L
DELICATES
6h 3h WASHING END
The End light flashes in the event of operating problems: � 4 flashes: door open � 2 flashes: problem with water draining � 1 flash: problem with water supply For more information see paragraph �Something not working�?
9 Programme selector dial
PROGRAMME
A B
COTTONS
C D
SYNTHETICS
The selector dial can be turned either clockwise or anticlockwise. Position O corresponds to Reset programme/Switching OFF of the machine. At the end of the programme the selector dial must be turned to position O, to switch the machine off. ATTENTION! If you turn the programme selector dial to another programme when the machine is working, the lights of the programme progress display start to flash for 2 seconds. The machine will not perform the new selected programme. 11
