TEMPERATURE CONTROL
The thermostat ensures that the required temperature is maintained in the freezer. Adjust the temperature by turning the button with a coin that fits the groove. Turning the thermostat button towards no. �SUPER� makes the temperature in the freezer colder, and turning the button towards no. 1 makes the temperature warmer. The correct setting can be found by measuring the temperature of the top package in the middle of the freezer. This should not have a temperature higher than -18°C.
CONTROL PANEL
The signal light is illuminated when the temperature in the freezer is the same as the thermostat setting. If the temperature in the freezer is higher than the thermostat setting, the signal light goes off (alarm). The signal light goes off owing to: Insertion of a large amount of fresh food. The light will come on again after a while. Opening the lid too long. The light will come on again after a while. A power failure or defect in the system. See under �In Case of Defects�.
Thermostat button Signal light
FREEZING
It is important that fresh food placed in the freezer is frozen quickly, and that the food already in the freezer is heated as little as possible. If more than 3-4 kg of food is to be frozen: Turn the thermostat button to the coldest setting (�SUPER.�). The freezer will now run continuously, creating a sufficient reserve of the temperature required. Turn the thermostat button 6-24 hours before placing new food in the freezer, depending on how much food is to be frozen. Place the food in the freezer and leave the thermostat set at �SUPER.� for about 24 hours more. Then turn the thermostat button back again. The freezer will return to normal storage temperature. If you forget to
OPENING/CLOSING THE LID
The lid is fitted with a tightly closing sealing strip to prevent moisture getting inside the freezer and increasing the amount of frost formed.When the lid is opened the air inside the freezer becomes slightly warmer and expands.As soon as the lid is closed again the air is cooled immediately.This may lead to the creation of a vacuum which makes it hard to open the lid immediately after it has been closed. This is quite normal. Wait a few minutes until the vacuum has disappeared, then open the lid by pulling gently. Never pull the handle violently.
