PHILIPS 25TR15C
Instrukcja Obsługi

ON-SCREEN MENU CONTROLS (CONTINUED)
CABLE
CABLE OR ANTENNA INPUT
BEGIN

N

OTE: If you went through First Time Setup

(page 3), this task has already been completed for you. You need to make sure that the TV is set to pick up either Cable TV stations or Antenna signals. In other words, the TV needs to know whether you have connected a Cable TV signal or a normal antenna to its ANTENNA plug (see page 2).

Press the MENU (M) button on the remote, then the CHANNEL v or w buttons (or press the MENU v or w on the TV) to select the word CABLE with the TV�s onscreen Arrow.

Press the VOLUME (+) or (-) buttons (on the TV or the remote) to select either: YESIf you DO have Cable TV connected to the TV. Channels 1-125 can be selected. NO- If you have an Antenna connected to the TV. Channels 2-69 can be selected.

Press STATUS button on the remote control to clear the screen.

SMART HELP
Try it out. Press the CHANNEL vw buttons and scan the channels. CHvw works only after STATUS button is pressed to clear the screen (or Menu times out about 1 minute.) Remember, to set the TV to select the channels on your Cable system, or in your area, see the "Autoprogram" steps in the SETUP section on page 3, and �Adding Channels � in the section below.

MU T
V

S U
T MU U
H L C H O C V

3
O W V

STAT

CABLE CHANNEL SLEEP CAPTION VOL. BAR EXIT
PO

YES NO

U S

U U
H V O C

S L
H C V
MEN

W E R

U S
O

1 4
W E R

E

L

2 6

7 8
SM AR

5

3

RF

U

MU T

0
T SLEE P

9

H C

1

O V

2

CHANNEL
ADD/DELETE CHANNELS

BEGIN

A

uto-Program (see page 3) adds all the channels it can find (on your Antenna or Cable TV system) into the TV's memory. Save/Delete channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory.

Press the MENU (M) button on the remote, then the CHANNEL v or w buttons (or the MENU v or w on the TV) to select the word CHANNEL with the TV�s on-screen Arrow.

Press Channel Number buttons on the remote (or CHANNEL vw buttons on the TV) to select the channel you want to SAVE (or DELETE.)

Press the VOLUME (+) button to SAVE the selected channel number into memory. Press (-) button to DELETE a channel from memory.

Press the STATUS button to clear the screen after adding (or deleting) all the channels you want.

12
CHANNEL SLEEP CAPTION VOL. BAR EXIT SETUP SAVED DELETED

4
STAT

1
PO

S

MEN

1 4 5

E

L

2 6

3

RF

7 8
SMA RT

9

0
SLEE P

SMART HELP

3

2

To SAVE a channel above 100, use the CH vw buttons on the TV. The remote number buttons only go up to channel 99.

SURF
CHANNEL SURF

BEGIN

A

series of up to eight previously viewed channels can be selected from the SURF button on your remote control. With this feature you can easily switch between different TV programs that currently interest you.

Press the MENU (M) button on the remote, then press the CHANNEL v or w (or the MENU v or w buttons on the TV) to select the word SURF with the TV�s on-screen Arrow.

Press the VOLUME (+) or (-) buttons to select the ALT. CHN.(Alternate Channel) or SURF. See the Smart Help section (to the right) for an explanation on the use of ALT. CHN. and SURF features.

Press STATUS button on the remote control to clear the screen.

SMART HELP
Remember, to use ALT. CHN., first select the number buttons on the desired channels with the remote. (For example: 11, and 22.) Then press the SURF button on the remote to quickly toggle

ALT. CHN. (Alternate Channel) Current and one previous channel. SURF - Up to eight channels in a channel Surf ring.

between the two channels. The Surf control will allow up to eight channels to be put into the �SURF Memory.� Enter the number of the desired channel; then press the SURF button to add it into the SURF Memory. (Example: With the SURF control selected in the Menu, you press channel 02, then the Surf button (while the channel display is still visible onscreen) to add channel 02 to the Surf memory. Repeat for up to 8 channels.

3 1
1 4 5
E
C H
STAT

SURF SMART SND CABLE CHANNEL SLEEP CAPTION
MEN

ALT. CHN. SURF

-

PO

O L

L E R

S

2 6

3

RF

Note: There are two methods to delete channels from the 8-channel SURF control ring: � To remove all channels from the SURF memory (with the exception of channel 3 which will be left within the SURF list) - Select the CABLE control in the on-screen menu and press the (+), (-) buttons. Adjust the control �YES/NO/YES� if you have

7 8
SMA R T

9

0
SLEE P

2

Cable TV; or �NO/YES/NO� if you are in the broadcast Antenna mode. � To remove all channels from the SURF memory (with the exception of the last viewed and currently selected channels) - From the SURF on-screen control option press the (+) or (�) button to select the ALT.CHN. control in the on-screen menu. Press the (+) or (�) button again to reselect the SURF option.

4 - IB7753 E001